| Paxton Access' Net2Air products allow for networking without having to install additional cabling. |
|
Net2Air USB bridge
 |
Communicates between the Net2 PC and Net2 nano control units |
|
|
Connects to the PC's USB port |
|
The Net2 nano range of access control units use Paxton Access' Net2Air wireless technology to communicate with the Net2 PC. The Net2Air USB bridge provides the wireless communication link between the PC running Net2 software and Net2 nano control units. We recommend the use of the Net2Air site surveyor kit for checking signal strength around a site prior to installation.
| Useful links |
|
|
|
|
|
Simply plug the unit into the USB port of the server. The Net2Air USB bridge driver software is loaded from the Net2 software. Run the Net2 server configuration program to register the bridge with the server program. The Net2 software will include the bridge in its list of ports to be monitored. Wireless communication can be established through Net2 software to products using Net2Air technology like Net2 nano. We recommend a maximum of 10 Net2 nano control units per bridge.
Once plugged in the Net2Air bridge provides the communication between the Net2 nano control units and the PC.
|
